IoT Hacking Bootcamp
What to Expect?
The IoT Hacking Bootcamp is a 4-week beginner-friendly hands-on bootcamp where you go hands-on with Raspberry Pi, hardware protocols, chip-off forensics, and firmware analysis — no experience required.
This bootcamp teaches you how to break down and understand IoT devices from the inside out. You’ll build your own lab using Raspberry Pi, connect to devices using UART and I2C, extract flash chips like a forensic analyst, and analyze real firmware using tools like AttifyOS and QEMU. Whether you're a student, hacker, developer, or just a curious techie — this course will make you confident in navigating the fascinating world of IoT hacking.
What You'll Learn
Get Certified (CIPT)
The Certified IoT Penetration Tester (CIPT) certification shows that you have real-world experience and knowledge in IoT security. CIPT certifies your ability to hack and protect the connected world by breaking down firmware, using UART interfaces, emulating smart devices, and finding real-world weaknesses in hardwear devices.
This certification sets you up for jobs like IoT Security Researcher, Embedded Systems Analyst, or Hardware Pentester, whether you're just starting out in cybersecurity or want to improve your skills.
Bootcamp Agenda
Session 1: IoT Basics + Raspberry Pi Setup
-
What is IoT? Architecture and attack surface
-
Raspberry Pi 101: flashing Kali/Ubuntu, headless setup, SSH
-
Deploying and testing IoT protocols: MQTT and Modbus
-
Writing basic IoT Python scripts for sensor simulation
-
How IoT devices are tested and attacked
-
Hands-On Labs:
-
Flash and configure Raspberry Pi
-
Install and run MQTT/Modbus services
-
Capture and analyze IoT traffic using Wireshark
- Flash and configure Raspberry Pi
- Install and run MQTT/Modbus services
- Capture and analyze IoT traffic using Wireshark
Session 2: Serial Communication & Protocol Demos
-
Intro to serial protocols: UART, I2C, SPI, JTAG
-
Pinouts, voltage levels, and safe wiring
-
Identifying UART interfaces on real boards
-
Live demos using Arduino Nano, NodeMCU
-
Reading sensor data, sniffing UART, flashing EEPROMs
-
Hands-On Labs
-
Connect UART to a real IoT device (router, NodeMCU)
-
Use minicom/serial terminal to get shell access
- Connect UART to a real IoT device (router, NodeMCU)
- Use minicom/serial terminal to get shell access
Session 3: Chip-Off Forensics (Demo + Hands-On)
-
What is chip-off forensics and when is it used?
-
NAND vs NOR flash, common ICs, target chip selection
-
Tools overview: CH341A, hot air rework, clips and adapters
-
Instructor demo: Desoldering and dumping a SPI flash chip
-
Dumping firmware using flashrom and analyzing with binwalk
-
Hands-On Labs
-
Practice using sample dumps provided
-
Locate and extract file systems (SquashFS, JFFS2)
- Practice using sample dumps provided
- Locate and extract file systems (SquashFS, JFFS2)
Session 4: Firmware Analysis & Emulation
-
Firmware basics: formats, file systems, where to find them
-
Using binwalk, firmware-mod-kit, and firmwalker
-
Setting up AttifyOS and toolchain
-
Exploring extracted configs, credentials, and scripts
-
Emulating firmware with QEMU (pre-configured walkthrough)
-
Hands-On Labs
-
Analyze a real firmware sample
-
Emulate firmware locally and access the web UI
- Analyze a real firmware sample
- Emulate firmware locally and access the web UI
Bootcamp Schedule (October 2025 Batch)
This live bootcamp is delivered over four consecutive Saturdays, starting from October 4th, 2025, and concluding on October 25th, 2025.
- Live, Instructor-led Training via Zoom
- Private Discord Community for Discussions and Q&A
- Recorded Sessions Available after each Class
Live Session Dates:
- Live Session 1: Saturday, October 4 @ 2 pm-6 pm IST
- Live Session 2: Saturday, October 11 @ 2 pm-6 pm IST
- Live Session 3: Saturday, October 18 @ 2 pm-6 pm IST
- Live Session 4: Saturday, October 25 @ 2 pm-6 pm IST
Who Should Join This Bootcamp?
- Cybersecurity students and ethical hackers
- Developers and QA professionals building IoT products
- Tech enthusiasts who love hardware and tinkering
- Anyone new to IoT hacking looking for a structured start
Training Instructor
Shaan Kalani
Associate Security Consultant
Shaan is a cybersecurity professional skilled in IoT security, Web Application Pentesting, and Chip-Off techniques, with a focus on extracting data and uncovering critical vulnerabilities in embedded systems.
Key Takeaways
- Hands-on experience with IoT hardware interfacing, serial protocols, and firmware analysis.
- Master the use of essential tools like Binwalk, Flashrom, QEMU and firmware-mod-kit.
- Learn chip-off forensics, serial protocols exploitation, and real-world IoT attack simulation.
- Build a practical understanding of how smart devices work and how to break them.
- Earn your Certified IoT Penetration Tester (CIPT) credential upon successful completion.
Why Attend?
- Stay ahead in the booming field of IoT security and hardware hacking
- Learn techniques that are directly applicable to smart home device pentests, embedded security, and bug bounties
- Build a standout portfolio with real firmware analysis, emulation, and protocol manipulation
- Get trained by an industry expert with deep hardware exploitation experience
FAQs
Not mandatory! If you have basic security or pentesting knowledge, you’ll do just fine — we’ll cover everything from setup to advanced exploitation.
Not at all! If you’re comfortable using Linux and have basic cybersecurity interest, you’re good to go. We’ll start from scratch and guide you throughout.
It’s highly recommended to use real-world testing methods, but we will demonstrate jailbroken approaches wherever applicable.
Yes! a physical iPhone is required for jailbreak and hands-on iOS pentesting
Yes! After completing the final exam & report submission, you will earn the Certified IoT Penetration Tester (CIPT) credential.
Trusted Partners
Ready to Master the Art of Pentesting?
Affordable Price
Unlock your potential with affordable upskilling! Our unbeatable course prices are your chance to level up without breaking the bank. Don't wait to enhance your skills – join us today and take the first step towards a brighter future!
Group Discount
Upskill your team with our hands-on Web Application Hacking Bootcamp and master real-world vulnerabilities.
5-9 Participants: 15% off
10+ Participants:20% off
Contact us at training@redfoxsec.com.
Certificate of Completion
Upon completing our course, you'll receive a certificate of completion to showcase your new skills. Add it to your resume or LinkedIn profile to stand out to potential employers. Let your accomplishments speak for themselves and take your career to the next level!
Hands-On Experience
Get hands-on experience with real-world scenarios and challenges, giving you practical skills that you can apply immediately in your career.
Expert Instructors
Learn from industry experts with years of experience in pentesting, who are passionate about sharing their knowledge and helping you succeed.
Flexible Learning
Whether you're a beginner or an experienced professional, our courses are designed to meet you where you are and help you reach your goals.
Get in Touch
Have a question, need assistance, or want to collaborate? We’re here to help!
Whether you're looking for cutting-edge cybersecurity solutions or expert training or want to learn more about our services, contact us today.
By clicking on Continue, I accept the Terms & Conditions,
Privacy Policy & Refund Policy